UAP-AC-EDU – Ubiquiti UniFi 802.11ac EDU Indoor 2.4/5GHz AP (3×3 MiMO)
UAP-AC-EDU – Ubiquiti UniFi 802.11ac EDU Indoor 2.4/5GHz AP (3×3 MiMO) supports 802.11ac and speeds of up to 1300Mbps in the 5GHz radio band and up to 450Mbps in the 2.4GHz radio band. The UAP‑AC‑EDU offers simultaneous dual-band operation with 3×3 MiMO on both radio bands. It has a range of up to 122m (400ft) and one Gigabit Ethernet port. It also features a public address system on board.
Technical Specifications
• Networking Interface: (1) 10/100/1000 Ethernet Ports
• Antennas: (3) Dual-Band Antennas, 3 dBi Each
• Max TX Power: 2.4GHz: 22 dBm – 5GHz: 22 dBm
• Buttons: Reset
• Wifi Standards: 802.11 a/b/g/n/ac
• Power Method: Passive Power over Ethernet (48V), 803.2at Supported (Supported Voltage Range: 44 to 57VDC)
• Power Supply: 48V, 0.5A PoE Gigabit Adapter
• Maximum Power Consumption: 20W
• BSSID: Up to Four Per Radio
• Power Save: Supported
• Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
• Certifications: CE, FCC, IC
• Mounting: Wall and Ceiling
• Operating Temperature: -10 to 70°C (14 to 158°F)
• Operating Humidity: 5 to 95% non-condensing
Advanced Traffic Management
• VLAN: 802.1Q
• Advanced QoS: Per-User Rate Limiting
• Guest Traffic Isolation: Supported
• WMM: Voice, Video, Best Effort and Background
• Concurrent Clients: 200+
Loudspeaker Acoustics
• Sensitivity: 94 dB (1W/1 m)
• Maximum SPL: 103 dB @ 1 m
• Frequency Response: 100 – 20,000 Hz
• Type: Two-Way Speaker with Second-Order HP Filter
Microphone Acoustics
• Sensitivity: -40 dB
• Polar Pattern: Omni
• Frequency Response: 50 – 20,000 Hz
Technical Information and Support
UAP‑AC‑EDU Data Sheet
Technical Support
