2.5mm PVC insualted Flat Twin and Earth Wire Cable
a wide range of copper and aluminum building wires and cables to meet today’s construction wiring challenges. Designed for wet or dry locations, building wire can be armoured or non-armoured. Most building wire has a maximum voltage rating of 600V, although 1000V building wire is also available.
Building Wire Applications
Building wire is used to carry electricity into or within buildings and structures, and can be employed for a variety of commercial and residential applications – including electrical wiring systems, power generators, motors and electrical lights. ACWU and NMWU, in particular, are well-suited for direct earth burial and wiring in hazardous locations. Stranded copper wire is often used for overhead electrical transmission and distribution, and for grounding electrical systems where high conductivity and flexibility is required.
PVC Insualted Twin and Earth Flat cable wire
Application: Domestic wiring cable. Can be installed in fixed installations in dry or damp premises clipped to surface, on trays or in free air where mechanical damage would not be an issue. Suitable for laying in conduit or trunking where mechanical protection is required. |
Standards: BS 6004:2000 |
Conductor:Plain copper conductors to BS EN 60228 |
Class 1 solid: 1.0mm², 1.5mm² and 2.5mm² |
Circuit Protection Conductor (Earth): |
Class 1 solid plain copper conductor: 1.0mm², 1.5mm² and 2.5mm² |
Insulation: PVC type TI 1 to BS EN 50363-3:2005 |
Sheath: PVC (Polyvinyl Chloride) to BS 7655-4.2:2000 |
Sheath Colour: Grey |
Voltage Rating: 300/500V |
Temperature Rating:Max: +70ºC |
Short Circuit: 160°C |
Minimum Bending Radius: 6 x overall diameter |
Core Identification: |
Twin: Brown Blue & bare earth |
Twin and Earth Wire PVC Insulated Flat Cable
Reference no. 6242Y
Flat twin and bare earth-continuity conductor 2Cx2.5mm2+E